NEMA PREMIUM EFFICIENCY TEFC - COMMERCIAL DUTY

NEMA Standard 3-Phase Motors
60Hz, 230/460V or 575V
NEMA Design B, Continuous Duty
Class F Insulation, 40°C Ambient, 1.15 S.F.
HPE™ Inverter Duty Wire

The Rolled Steel TEFC is a durable, lightweight, feature-packed machine designed to tackle all your commercial duty requirements. From Process and Manufacturing to HVAC and Compressors this NEMA premium efficient inverter duty motor has you covered.

Couple your Rolled Steel TEFC with our TECO VFD’s for energy savings & speed control. TWMI offers a variety of HVAC, light industrial and commercial solutions.

1/4-10HP
Totally Enclosed Fan Cooled IP44 Design
60Hz, 230/460V or 575V
Horizontal F1 Mount
3600, 1800 & 1200 RPM
NEMA Premium Efficiency
1.15 S.F.
Class B Temperature Rise
Continuous Duty
40°C Ambient
Class F Insulation
Max Elevation 3300ft
NEMA Design B
Shielded Bearings
Multemp SRL Grease
Aluminum Rotor
Rolled Steel Frame with Cast-Iron End Brackets
Rolled Steel Conduit Box

Number of Leads 230/460V: 9 Leads 1/4-5HP; 12 Leads 7.5 and Larger; 575V: 3 Leads
Solderless Lug Terminals on All Leads
Grounding Terminal Inside Main Terminal Box
Plastic Fan
Paint System: Phenolic Rust Proof Base with Lacquer Top Coat
Stainless Steel Nameplate
Rubber Flinger on DE
*HPE™ High Pulse Endurance Spike Resistant Wire
Phenolic Alkyd Resin Varnish
Bi-Directional Rotation
Usable on 208V Sinusoidal Power Only
CSA Certified, UL recognized and CE marked
*Meets NEMA MG1 Part 31.4.4.2
CSA Energy Efficiency Verification (EEV)
*Speed Ranges up to 10:1 CT, and 20:1 VT. Refer to data sheet for rating specific turn down ratios
56/56C Frame Available 1/4-3HP

* Precautions should be taken to eliminate or reduce voltage spikes and shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part 31.4.4.