Product Overview

TYPE: AEHH8B

HP Range - 1HP through 500HP*
Speed - 3600, 1800, 1200, 900 RPM
Voltage - 460V, 575V
Frequency - 60 Hz

The TECO - Westinghouse ADVANTAGE PLUS IEEE 841 motor provides all the standard features found in the ADVANTAGE PLUS motor but meets and exceeds IEEE Std 841™-2009  for "severe duty" motors.

Design Features

• *CSA Certified for Class I, Division 2, Groups B, C and D;  S.F. 1.0 or 1.15
•  *CSA Certified for Inverter Duty operation in a Class I, Division 2, Groups B, C and D Area; S.F. 1.0

• *Inverter Duty Speed Range includes 10:1 CT and 20:1 VT; S.F. 1.0
• Class F insulation system
• HPE™ - High Pulse Endurance spike resistant wire for inverter duty applications
• Meets NEMA MG1 Part 31
• Reinforced end turn lacing
• NEMA Premium efficiency
• All cast-iron construction including end brackets, fan cover and conduit box for rigidity and excellent corrosion resistance
• Oversized high performance bearings
• IP55
• Bearing temperature rise below 45°C for 4P and 6P ratings; 50°C for 2P motors
• INPRO/Seal bearing isolator on both DE & NDE for all ratings.
• Sound pressure levels below 85 dBA providing quiet operation
• Frame provided with two threaded drain holes with drain plugs and a drilled and tapped hole for a ground lug
• Corrosion-resistant 90° rotatable cast iron conduit box has twice the volume required by NEMA
• Regreaseable bearing construction with inner bearing caps prevent bearing contamination
• All internal rotor, stator and shaft surfaces are cleaned and coated with moisture resistant varnish; exterior is painted with zinc-chromate epoxy base with a blue finish
• Stainless steel hardware and nameplate
• Vibration will not exceed 0.08 inches per second
• Vibration signature shipped with motor
• Meets or exceeds IEEE Std 841™-2009
• Meets IEEE 45 Marine Duty 1 - 125HP
  

  * 2,4 & 6 Pole Motors Only